Commercial Wall-Mounted Stainless Steel Hand Sink with Faucet

A commercial wall-mounted hand sink provides a dedicated hand-washing point without requiring a floor-standing cabinet or sink table. For restaurant kitchens, foodservice back rooms, preparation areas and other commercial projects, the wall-mounted format helps keep the floor area below the sink open while concentrating the basin, faucet, backsplash and drainage interface into a compact hygiene station.

This commercial wall-mounted stainless steel hand sink with faucet is designed as a straightforward manual hand-washing solution. Unlike SENFON's knee-operated, foot-operated or sensor-controlled wash stations, this page focuses on a conventional wall-mounted hand sink where the faucet, bowl, backsplash, side splash protection, drain and wall fixing details are specified according to the project.

SENFON supports B2B supply for importers, distributors, wholesalers and commercial kitchen project buyers. Overall dimensions, bowl size, backsplash, side splashes, faucet interface, drain position, stainless steel grade, actual component thickness and mounting details can be reviewed before quotation and production.

For other compact hygiene and specialty washing equipment, view the commercial wall-mounted sinks and specialty stainless steel equipment collection.

Commercial Wall-Mounted Hand Sink with Manual Faucet Configuration

This product is positioned as a standard commercial hand sink with faucet for projects that do not require knee, foot or sensor-operated water control.

The reference configuration combines:

• A compact stainless steel hand-washing basin
• A rear backsplash for the wall-side wet area
• Side splash panels where required by the selected configuration
• A faucet mounting area or specified faucet interface
• A drain outlet and waste connection
• Wall-mounting brackets or fixing points according to the approved structure

The exact faucet, drain, mounting hardware and plumbing components included in an order should be stated in the quotation rather than assumed from product photographs alone.

Why Use a Wall-Mounted Hand Sink?

The main advantage of a wall mount hand sink is its compact installation format. Because the basin is supported from the wall rather than by a full floor-standing cabinet, the area underneath can remain comparatively open.

This can be useful where the project requires a dedicated hand-washing point but available floor area is limited. The open area below the sink can also make the plumbing route and surrounding floor easier to inspect during installation and cleaning, depending on the final mounting arrangement.

Wall-mounted installation is therefore often considered for:

• Restaurant kitchen hand-washing points
• Foodservice preparation and back-of-house areas
• Canteens and central kitchen projects
• Food-processing support areas
• Commercial wash and hygiene stations
• Workshops and institutional service areas

The actual product specification and installation requirements must still be confirmed according to the destination project and local plumbing or hygiene requirements.

Compact Stainless Steel Hand Sink for Limited Wall Space

A commercial hand sink is normally much more compact than a full-size pot sink, prep sink or compartment sink. For B2B buyers, however, “compact” should not mean choosing the smallest possible basin without considering usability.

The overall width, front-to-back projection and bowl depth should be selected according to:

• Available wall width
• Aisle clearance in front of the sink
• Required installation height
• Faucet spout clearance
• Expected hand-washing use
• Drain and water-inlet locations
• Adjacent equipment, doors or passageways

For chain-store or repeated project installations, maintaining a controlled dimensional specification can also help distributors and contractors standardize installation across multiple locations.

Backsplash and Side Splash Configuration

The backsplash forms the main wall-side interface of a wall-mounted hand wash sink. Its dimensions affect faucet positioning, wall protection and the overall height of the unit.

Depending on the selected model, additional side splash panels can be used where the buyer needs more separation between the hand-washing area and adjacent surfaces. The reference product shown on this page uses a raised backsplash and side splash structure.

When preparing a quotation, buyers should confirm:

• Backsplash height
• Left-side splash requirement
• Right-side splash requirement
• Side splash height and depth
• Faucet mounting position
• Clearance from nearby walls or equipment

A single rear backsplash, rear-and-one-side splash or rear-and-two-side splash arrangement can create different installation dimensions, so the selected version should be shown clearly on the approved drawing.

Faucet Configuration and Water-Control Scope

The faucet is an important part of a commercial hand sink with faucet, but the basin itself does not determine every faucet specification.

Before ordering, confirm:

• Manual faucet type
• Single-hole or multi-hole mounting requirement
• Faucet hole spacing where applicable
• Spout height and reach
• Hot, cold or mixed-water requirement
• Water inlet size and connection standard
• Whether faucet fittings and flexible hoses are included

If the project requires automatic touchless operation rather than a conventional manual faucet, use the dedicated commercial wall-mounted sensor hand wash sink page instead.

Sink Bowl Size and Depth

Bowl dimensions directly affect how comfortable the hand-washing station is to use and how far the complete sink projects from the wall.

Important bowl dimensions include:

• Internal bowl length
• Internal bowl width
• Bowl depth
• Corner radius
• Drain position
• Distance between the bowl and faucet spout

The bowl should not be selected from overall sink dimensions alone. For project buyers, specifying the internal usable dimensions makes quotations easier to compare and reduces the chance of receiving visually similar products with substantially different usable basin sizes.

Stainless Steel Grade and Actual Thickness

Professional B2B purchasing should not rely only on descriptions such as “premium stainless steel” or “heavy duty.” The actual material grade and thickness should be confirmed as part of the product specification.

For this wall-mounted stainless steel hand sink, SUS201, SUS304, SUS316 or SUS430 can be reviewed according to the buyer's application and approved specification. The existing reference range for sheet thickness on this product is approximately 0.6–1.2 mm where structurally appropriate, but the final thickness should be confirmed by component and project requirement.

For example, the basin, backsplash, side splash, bracket or reinforcement structure do not necessarily need to be described by one identical thickness value. The quotation or approved drawing should identify the construction being supplied.

For wet commercial environments, buyers should also consider:

• Destination environment
• Cleaning chemicals and maintenance method
• Frequency of use
• Local project specification
• Required material documentation

Wall Fixing and Mounting Conditions

A wall-mounted sink can only perform as intended when the mounting structure and supporting wall are suitable for the installation. The sink itself cannot define the correct anchors for every wall type.

Before production or installation, the project should confirm:

• Wall construction
• Installation height
• Bracket or fixing-point location
• Anchor type selected by the installer
• Water inlet position
• Drain outlet position
• Required clearance behind or below the sink

Concrete, masonry, framed partitions and other wall structures may require different fixing methods. The local contractor or installer should therefore confirm the final wall anchors and installation method according to the actual site condition.

Drainage and Plumbing Interface

Drainage should be specified together with the sink rather than treated as an afterthought. The drain outlet, waste fitting and trap arrangement can influence installation height and the usable open space below the basin.

B2B buyers should confirm:

• Drain outlet diameter
• Waste fitting requirement
• Whether a basket strainer is required
• Trap inclusion or site-supplied trap
• Drain direction
• Connection standard for the destination market

The quotation should clearly identify which plumbing accessories are included and which items remain the responsibility of the local installer.

Wall-Mounted Hand Sink vs Round-Front Hand Wash Sink

SENFON has a separate commercial round-front wall-mounted hand wash sink . Although both products are compact wall-mounted hand-washing stations, their primary product identities are different.

This page should therefore remain focused on the standard wall-mounted hand sink and faucet specification instead of repeating the round-front product's geometry-based content.

Manual Faucet vs Knee-Operated Hand Wash Sink

This product uses a conventional faucet-oriented hand-washing layout. It should not compete with SENFON's dedicated commercial wall-mounted knee-operated hand wash sink .

A knee-operated sink is selected when reducing direct hand contact with faucet controls is part of the project requirement. Its valve system, front knee-control structure and plumbing requirements make it a separate product type.

Choose this standard wall-mounted hand sink when:

• A conventional manual faucet is suitable
• The project needs a simple compact hand-washing point
• No knee-control structure is required
• No electrical or sensor control system is required

Choose the knee-operated model when hands-free mechanical water control is an explicit project requirement.

Standard Wall Installation vs Corner Sink

This hand sink is designed primarily for installation along a normal wall surface. It should also remain separate from the commercial stainless steel corner wall-mounted sink .

The corner model uses a different rear geometry to occupy a room corner. Projects with a normal straight-wall position should use a standard wall-mounted configuration instead of choosing a corner sink simply because both products are compact.

Typical B2B Applications

This stainless steel wall-mounted hand wash sink can be considered for commercial projects requiring a dedicated compact washing point, including:

• Restaurant and hotel kitchen hand-washing areas
• Foodservice preparation rooms
• Commercial kitchen entrances or hygiene points
• Canteens and institutional kitchens
• Food-processing support areas
• Workshops and service rooms
• Chain-store or multi-site equipment projects

Application alone does not confirm regulatory suitability. The buyer should verify local hygiene, plumbing, accessibility and installation requirements for the destination project.

What Importers and Project Buyers Should Specify

To receive an accurate quotation for a commercial wall-mounted stainless steel hand sink with faucet, buyers should provide more than a reference photograph.

A useful RFQ should include:

1. Overall sink width × depth × height
2. Internal bowl dimensions and depth
3. Backsplash height
4. Left and/or right side splash requirement
5. Required stainless steel grade
6. Actual component thickness if specified
7. Faucet type and mounting-hole requirement
8. Hot/cold/mixed water requirement
9. Drain and waste-fitting requirement
10. Wall type and intended installation height
11. Quantity
12. Destination country, city or port
13. Packing or private-label requirement
14. Drawing, sketch or reference product if available

For distributors, this specification also helps keep different production batches consistent when the same hand sink is purchased repeatedly.

OEM/ODM Wall-Mounted Hand Sink Projects

SENFON supports customized commercial stainless steel hand sink projects for importers, distributors, wholesalers and project contractors.

Where the required configuration differs from the reference model, customization can be reviewed around:

• Overall dimensions
• Bowl dimensions and depth
• Backsplash and side splash structure
• Faucet mounting interface
• Material and actual thickness
• Drain position
• Wall brackets and fixing points
• Accessory scope
• Export packing
• Private-label requirements

The preferred workflow is: requirement → feasibility review → quotation → drawing revision → approval → production → QC → packing.

For non-standard projects, see OEM/ODM commercial kitchen equipment customization .

How to Compare Commercial Hand Sink Quotations

Two wall-mounted hand sinks can look almost identical in online photographs while using different bowl dimensions, materials, backsplash structures, faucet interfaces or included accessories.

When comparing suppliers, check the same specification for each quotation:

• Actual overall dimensions
• Internal usable bowl size
• Stainless steel grade
• Actual component thickness
• Backsplash and side splash structure
• Faucet model or faucet inclusion
• Drain and plumbing accessories
• Wall-mounting components
• Packing method
• Quantity and destination basis

This allows B2B buyers to compare the actual product specification rather than choosing between different products based only on a similar photograph or generic description.

Wall-Mounted Hand Wash Sink Buying Guide

For buyers comparing manual, knee-operated, sensor-controlled, corner and other compact wash-station configurations, read the Commercial Wall-Mounted Hand Wash Sinks & Industrial Wash Basins B2B Buying Guide .

The guide covers broader product-selection questions, while this page remains focused specifically on the standard commercial wall-mounted hand sink with faucet.

Frequently Asked Questions

What is the main search role of this product?

This page is for buyers searching for a standard commercial wall-mounted stainless steel hand sink with a conventional faucet configuration. It is intentionally separated from knee-operated, foot-operated, sensor-controlled, round-front and corner hand wash sink pages.

Is the faucet included with every order?

The required faucet and accessory scope should be confirmed in the quotation. The product can be supplied according to the approved faucet interface and project requirement, but buyers should not assume that every faucet, hose, fitting or trap shown in reference images is automatically included.

Can the sink be supplied with side splashes?

Yes, the selected configuration can include side splash panels. The required left, right or double-side splash arrangement and dimensions should be confirmed before production.

Can I customize the bowl dimensions?

Overall sink dimensions, internal bowl size and bowl depth can be reviewed for B2B projects. The final configuration must remain compatible with the backsplash, faucet, drain and wall-mounting structure.

Which stainless steel grades are available?

SUS201, SUS304, SUS316 or SUS430 can be reviewed according to the application and buyer specification. Final material should be confirmed in the quotation or approved drawing.

What thickness can be supplied?

The existing reference range for this product is approximately 0.6–1.2 mm where suitable. For professional purchasing, actual thickness should be confirmed by component rather than using a generic “heavy-duty” description.

Can this sink replace a knee-operated or sensor sink?

Not when hands-free control is a specific project requirement. Knee-operated and sensor-controlled sinks use different water-control systems and should be selected through their dedicated product pages.

Can this sink be installed on any wall?

The correct wall anchors and mounting method depend on the actual wall construction and installation conditions. The local installer should verify the wall, anchor system, fixing points and service connections.

What information should I send for a quotation?

Send the overall dimensions, bowl size, backsplash and side splash requirements, material, thickness, faucet type, drain specification, quantity, destination and any available drawing or reference photograph.

Request a Commercial Wall-Mounted Hand Sink Quotation

If you are sourcing a commercial wall-mounted stainless steel hand sink with faucet for distribution, project supply or repeated commercial installation, send SENFON the required dimensions, bowl size, backsplash, side splash configuration, faucet interface, material, actual thickness, quantity and destination.

For customized models, drawings or reference products are recommended so the basin, faucet, plumbing and wall-mounting interfaces can be confirmed before production.

REQUEST A B2B QUOTATION