Sliding door stainless steel worktable cabinet assembly guide by SENFON

Sliding Door Worktable Cabinet Assembly Guide | SENFON

html

This SENFON assembly guide shows how to assemble a knock-down stainless steel worktable cabinet with sliding doors. After SENFON structural design optimization, this KD cabinet design can save around 70% shipping space compared with a fully welded cabinet, while keeping strong stability after correct assembly.

SENFON is a professional stainless steel commercial kitchen equipment source factory based in Shandong, China. We manufacture stainless steel worktable cabinets, commercial worktables, sinks, shelving racks, trolleys, dish cabinets, and customized OEM/ODM stainless steel products for global B2B buyers, distributors, importers, project contractors, hotels, restaurants, schools, hospitals, central kitchens, and food processing facilities.

For related cabinet and worktable products, you can view our Commercial Stainless Steel Worktables & Cabinets collection.

Step 1: Check All Parts Before Assembly

After receiving the product, please open the package and check whether all parts and accessories are complete before assembly. This helps ensure the cabinet can be assembled smoothly according to the instruction sheet and video guide.

  • Stainless steel tabletop: 1 piece.
  • Left and right side panels: 2 pieces.
  • Rear panel: 1 piece.
  • Front panel: 1 piece.
  • Sliding doors: 2 pieces.
  • Stainless steel adjustable feet: 4 pieces.
  • Middle shelf and bottom shelf: 2 pieces in total.
  • Screw accessories: 1 package.

Step 2: Connect the Side Panels and Rear Panel

Two people are recommended for assembly. First, find the left and right side panels and the rear panel of the cabinet body. Align the reserved screw holes and connect the two side panels with the rear panel.

Fix the panels firmly through the reserved screw holes. At this stage, the cabinet frame should be kept square and stable before installing the front panel.

Step 3: Install the Front Panel

Take the front panel and connect it with the left and right side panels of the cabinet body. Align the screw holes before tightening the screws. After this step, the basic cabinet frame is formed.

Step 4: Place the Tabletop Face Down

Place the stainless steel tabletop face down before installing the cabinet frame. It is recommended to put carton board, foam, or a blanket under the tabletop to protect the surface and prevent scratches during assembly.

Step 5: Fix the Cabinet Frame onto the Tabletop

Turn the assembled cabinet frame upside down and place it on the back of the tabletop. The tabletop and cabinet frame have corresponding reserved screw holes. Align the holes carefully, then use screws to fix the cabinet frame firmly onto the tabletop.

Step 6: Install the Shelf Support Clips

Inside the cabinet, there are four adjustable shelf support clips. Install the support clips into the cabinet body according to the required shelf height. The shelf height can be adjusted according to actual use requirements.

Step 7: Place the Middle Shelf and Bottom Shelf

Place the shelf panels onto the installed support clips. The middle shelf and bottom shelf are designed to be exactly the same. Their size and thickness are the same, so they do not need to be distinguished during assembly. Either panel can be placed in the middle position or bottom position.

Step 8: Install the Stainless Steel Adjustable Feet

Install the four stainless steel adjustable feet onto the cabinet body. Use screws to fix and tighten each foot firmly. After installation, the adjustable feet can help keep the cabinet stable on different floor conditions.

Step 9: Install the Sliding Doors into the Upper Rail

Install the two sliding doors by placing the rollers of the doors into the upper sliding rail. Make sure the rollers are properly seated in the upper rail track and that the doors can slide smoothly.

After the sliding doors are installed, check the movement of both doors and confirm that the cabinet opens and closes normally.

Step 10: Final Check and Finish Assembly

After all parts are installed, check all screw positions again and make sure every screw is tightened firmly. Once the cabinet is placed in the normal upright position, the assembly is complete.

Assembly Reminder: This KD stainless steel worktable cabinet is designed for convenient packing, lower shipping volume, and easy assembly after delivery. Compared with a fully welded cabinet, this structure can save around 70% shipping space. After proper assembly and screw tightening, the cabinet has strong stability and durability, similar to a welded structure.

Related Stainless Steel Worktable Cabinet Products

This assembly method is mainly used for SENFON knock-down stainless steel worktable cabinets with sliding doors. For cabinet structure, custom sizes, material options, and bulk order requirements, please check the related product pages below.

More SENFON Product Series

SENFON supplies a wide range of stainless steel commercial kitchen equipment for overseas B2B buyers, including worktable cabinets, sinks, worktables, shelving racks, trolleys, electric food warmers, and customized project products.

Factory Support for B2B Buyers

SENFON supports bulk orders, custom sizes, OEM/ODM requirements, mixed container orders, and commercial kitchen project supply. For more factory information, manufacturing capability, certification support, and customization service, please visit:

For bulk orders, OEM/ODM requirements or commercial kitchen project supply, contact SENFON for factory quotation and customization support.

Back to blog

Leave a comment

COLLECTIONS